Innovative Conversion of PretreatedBuxus sinicainto High-Performance Biocomposites for Potential Use as Furniture Material

Traditional wood-based panels are usually made from large-diameter trees and rely on adhesives for compactness, which negatively impacts the environment and human health. However, the widely distributed small-diameter shrubs are good raw materials for wood-based panels with abundant fibers, but are often under-exploited. This research reports the preparation of self-bonding biocomposites from Buxus sinica by an innovative combined approach of extraction, alkali treatment, and hot molding. The resulted biocomposites show better mechanical properties in which the flexural modulus (7.79 GPa) and the tensile modulus (4.33 GPa) were 5 times and 1.7 times higher than the conventional fiberboard, respectively, and also demonstrated better hydrophobicity than fiberboard, which could be due to the layer of lignin that formed on its surface preventing the infiltration of water. To sum up, the biocomposites prepared from small-diameter shrubs meet the requirement of the furniture and architectural decoration materials, suggesting that the proposed approach can be used to produce high-performance biocomposites.