Reducing Interface Defects and Porosity of Adhesive Bonded Aluminum Alloy Joints via Ultrasonic Vibration

The surface microstructure formed by physical or chemical modification is essential for the desired joint strength. However, defects in the bonding interface and adhesive can be found. Such defects decrease shear strength and durability. In this study, ultrasonic vibration was applied to liquid adhesive on the sandblasted aluminum alloy plates. With ultrasonic treatment, the joints obtained the compact bonding interfaces and lower porosity of the adhesive layer. The treatment improved the shear strength by 9.1%. After two weeks of hydrothermal aging, the shear strength of joints only sandblasted decreased drastically by 48.9%, while it was 14% for the joints with ultrasonic vibration. The cavitation effect in the adhesive was detected by the aluminum foil erosion method. The result showed that a great number of micro-jets generated by the cavitation effect have intensive impact on the bonding interface which provide the adhesive with powerful force to fill the micro-grooves. Another finding in this work is that bubbles were gathered in the adhesive away from the vibration area. This mechanism was successfully used to reduce the porosity of the adhesive layer of joints.