放大器
电气工程
邻道
线性
功率增加效率
晶体管
材料科学
电子工程
输入阻抗
工程类
射频功率放大器
电阻抗
CMOS芯片
电压
作者
Muhammad Furqan Haider,Zehua Xiao,Fei You,Songbai He
摘要
Abstract An optimal balance between high efficiency and high linearity is one of the main performance metrics of modern base stations to handle the deep compression of the power amplifier (PA) module. In principle, the plethora of amplitude‐to‐amplitude (AM‐AM) and amplitude‐to‐phase (AM‐PM) distortions are issues worth exploring. Therefore, this paper presents a linearized harmonic‐tuned PA that operates at 2.4 GHz. The presented PA utilizes a compact input matching network (IMN) and output MN (OMN) with shunt‐connected tunable resonant circuits augmented by the stabilization network, whose presence greatly reduces the transistor parasitics and high‐order effects. Hence, a joint embodiment of each other gives optimal fundamental impedance matching alongside harmonic terminations and precise AM/PM waveform properties. The measurement results have shown that the fabricated PA exhibits peak saturated output power of 40.9 dBm and peak drain efficiency (DE) of 67%. In addition, the AM‐AM and AM‐PM curves under continuous‐wave excitation yield a gain flatness of 0.5 dB over a 37.5 dBm power range and ±3.5° phase distortion, respectively, when the input power level is swept up to the saturation level of 40 dBm. When driven with a 5 MHz 64‐QAM OFDM signal and 6.9 dB power back‐off, the manufactured PA meets the adjacent channel leakage ratio specification of −30 dBc at an average output power of 34.5 dBm.
科研通智能强力驱动
Strongly Powered by AbleSci AI