材料科学
超级电容器
电容
电极
电解质
储能
钒
氧化物
导电体
氧化钒
化学工程
碳纤维
纳米技术
光电子学
功率密度
电流密度
多孔性
平面的
石墨烯
电导率
色散(光学)
比表面积
氮化钒
镍
3d打印
假电容器
半电池
作者
Sophia Uemura,Celeste Elkort,Kaitlyn Than,Sydney Rapier,Yuto Katsuyama,Joanne Hui,Zhiyin Yang,Hung‐Yi Huang,Chi‐Chang Hu,Maher F. El‐Kady,Richard B. Kaner
出处
期刊:Small
[Wiley]
日期:2026-03-17
卷期号:22 (36): e14911-e14911
被引量:4
标识
DOI:10.1002/smll.202514911
摘要
ABSTRACT The rising demand for sustainable and scalable energy storage systems has accelerated the development of aqueous zinc‐based technologies. However, conventional slurry‐cast planar electrodes underperform at high mass loading, causing low areal capacitance and sluggish rate performance. Herein, we introduce a 3D printed freestanding, binder‐free conductive carbon lattice electrode integrated with vanadium oxide (VO x ). The 3D framework facilitates homogeneous dispersion of VO x , increasing the electroactive surface area, enhancing the ion transport ability, and maintaining structural integrity under high current density. Enabled by this architecture and a high mass loading of 38 mg cm −2 , the electrode achieves areal capacitance of 7129 mF cm −2 at 3 mA cm −2 , areal power and energy densities of 44 mW cm −2 and 1 mWh cm −2 , along with robust cycling performance, with a capacity retention of 82% after 1500 cycles. To ensure rigorous and reproducible evaluation, we introduce a sealed, 3D‐printed test cell that fixes the inter‐electrode spacing and suppresses electrolyte evaporation. Compared with open beaker setups commonly used for three‐electrode measurements, the printed cell yields more consistent capacitance and resistance. It also maintains 98% capacity retention after 1400 cycles. This synergy of 3D engineered electrodes and cells provides a reproducible pathway to practical, high‐energy, and power‐density zinc‐ion supercapacitors.
科研通智能强力驱动
Strongly Powered by AbleSci AI