Suspected sources of microplastics and nanoplastics: Contamination from experimental reagents and solvents

There is an increasing concern about the potential effects of microplastics (MPs) and nanoplastics on human health and other organisms. For the separation and detection of MPs, there are various approaches, and the distinct procedures led to different results. However, the presence of MPs in the reagents was not addressed, which could cause false and/or inaccurate results during MPs detection. In this study, the chemical reagents commonly used for the separation and detection of MPs were selected to ascertain whether these reagents introduce MPs. It was shown that a large number of MPs were detected in the reagent and solvent samples. The largest number of MPs (>1 μm) was detected in the KOH reagent, with the abundance of 3070 items/g. The order of MPs abundance in the selected reagents was: KOH > NaCl > CaCl2 > SDS > NaI > H2O2. The types of MPs were the same as the body and stopper of the reagent packaging bottles. MPs size detected in reagent bottles was primarily smaller than 10 μm. The abundance of MPs in the reagents were independent of their purity, however, there was a certain difference in MPs abundance in reagents from different manufacturers. Furthermore, the presence of nanoplastics (< 1 μm) was verified in the reagents through Py-GCMS, with the abundance (39.47-43.01 mg/kg) higher than that of MPs. The obtained results in this study raised specific requirements and cautions for MPs and nanoplastics related research in terms of quality control. Also, this work can facilitate a more accurate assessment of MPs concentrations in the environment.