Covalent Organic Frameworks Interfacial Modification of Ceramic Electrolytes for Enhanced Electrochemical Performance

Abstract The interface instability between inorganic ceramic electrolytes and lithium metal anodes seriously affects the cycling behavior of high‐performance lithium‐metal batteries. Herein, an in situ interfacial modification strategy is proposed to build the precise hybrid organic/inorganic lithium‐ion conducting layer where the Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) particle surface is anchored by ion‐conducting covalent organic frameworks (COF) with affluent poly(ethylene glycol) (PEG) moieties. This interlayer features ion transport regulation to avoid high interfacial resistance and enhances interfacial stability by building a functional COF‐based shield against electrons. These as‐prepared particles are employed to fabricate flexible quasi‐solid electrolyte membranes interconnected by polytetrafluoroethylene binder based on the dry process. The obtained membranes perform two‐fold increase in ion conductivity at 30 °C of 2.55 × 10 −3 S cm −1 and the prolonged lithium deposition up to 1000 h compared to the pristine, which are attributed to synergistic effects in the inorganic/organic phase. Moreover, an integrated cathode/electrolytes design is proposed and exhibits excellent cycling performance with capacity retention of 98.8% after 200 cycles at 1 C. The corresponding pouch cells can light up LED after bending and recovery. This research provides new insights into the great potential of fabricating soft ceramic‐based membranes in a low‐cost and green way for highly‐stable lithium‐metal batteries.