纤维素
3d打印
电池(电)
材料科学
化学
纳米技术
化学工程
有机化学
工程类
制造工程
量子力学
物理
功率(物理)
作者
Carolina Reyes,Erika Fivaz,Zsófia Sajó,Aaron Schneider,Gilberto De Freitas Siqueira,Javier Ribera,Alexandre Poulin,Francis W. M. R. Schwarze,Gustav Nyström
标识
DOI:10.1021/acssuschemeng.4c05494
摘要
Growing e-waste and the dwindling of non-renewable materials underscores the urgency to develop electronics based on renewable natural resources. Using cellu-lose as a material for 3D printing living fungal electrodes, is a novel way to harness their metabolic activity for potential use in electrochemical devices. This study shows that the yeast Saccharomyces cerevisiae and the white-rot fungus Trametes pubescens in combination with cellulose nanocrystals (CNC) and cellulose nano-fibrils can be 3D printed and that both fungi grow inside the inks. Adding carbon black and graphite flakes to the inks makes them electronically conductive for po-tential use as electrodes in fungal batteries, specifically microbial fuel cells (MFC). A single battery produces a maximum power density of 12.5 μW/cm2 and a maxi-mum current density of 49.2 μA/cm2 (22 kΩ). These fungal biobatteries can produce between 300-600 mV for several days, delivering 3-20 μA for external loads be-tween 10 and 100 kΩ. Attaching four batteries in parallel can power a small sensor for 65 hours. Also, a fully biodegradable fungal MFC can be constructed with bees-wax and a customized cellulose proton exchange membrane. This is the first study that reports on 3D printed cellulose-based fungal electrodes in an MFC.
科研通智能强力驱动
Strongly Powered by AbleSci AI