材料科学
各向同性
非线性系统
扭转(腹足类)
可塑性
结构工程
本构方程
机械
张力(地质)
压力(语言学)
复合材料
有限元法
极限抗拉强度
工程类
物理
外科
哲学
医学
量子力学
语言学
作者
Luca Cortese,Filippo Nalli,Marco Rossi
标识
DOI:10.1016/j.ijplas.2016.07.003
摘要
In this paper, a nonlinear model for ductile damage accumulation is presented and applied to predict failure under non-proportional loading conditions. To this purpose, several tension-torsion tests were executed on samples of an isotropic Grade X65 steel, using a custom biaxial equipment. The experiments were carried out on hollow cylindrical specimens with two different gauge axial lengths. Non-proportional loading paths were achieved changing the tension to torsion ratio during runs. The dependence of damage accumulation on the equivalent plastic strain was modelled by means of a nonlinear function of the triaxiality and the deviatoric component of the stress state. The devised model, suitable to predict failure under complex loading paths, was implemented in a commercial FE code. All experimental tests were simulated in order to monitor the stress and strain evolution within the specimen, and to determine the onset of fracture. In the numerical simulations, the constitutive behavior was described using both a J2 and a J2J3 plasticity models. Thanks to the applied testing conditions, different stress states were induced in the material. A straightforward calibration of the accumulation model was achieved from few experiments, then the transferability of the formulation was validated on different tests. The proposed method showed appreciable improvements in final fracture prediction over a linear approach, as well as over other nonlinear approaches from the literature.
科研通智能强力驱动
Strongly Powered by AbleSci AI