Target Development for Transmission and Electric Motor NVH

<div class="section abstract"><div class="htmlview paragraph">It is a common practice to conduct NVH fingerprinting and benchmarking assessments at the powertrain level, to understand source level noise and vibration. To assess the NVH influence of engine, e-motor, and transmission, sub-system testing is often conducted in addition to full powertrain testing. These powertrain or sub-system investigations provide valuable information regarding the status of “source” level excitations relative to targets and / or competitive powertrains. In the case of transmissions and e-machines, it is particularly important to understand source level tonal content and how this will be perceived at the vehicle level. However, variation in component design results in differences in order content, which complicates the process of objectively comparing multiple products.</div><div class="htmlview paragraph">Multiple methods are presented here for characterizing tonal content of transmission and e-machines, based on assessments conducted in a component hemi-anechoic dynamometer test cell. Ultimately, sound quality is assessed by the customer at the vehicle level. Accordingly, the methods developed incorporate means of cascading results between component level and vehicle level. Furthermore, since the perception of tonal noise content is dependent upon the masking noise present, approaches for development of masking surfaces are developed for both component-level and vehicle-level assessments.</div><div class="htmlview paragraph">With the information provided by these methods, educated decisions can be made regarding plans for mitigation of source NVH issues early in the development process.</div></div>