The effect of material properties and process parameters on die filling at varying throughputs: A PLS-model-based analysis

When tablets are manufactured on a rotary tablet press and the throughput is increased, it leads to changes in powder dynamics during die filling due to formulation characteristics and changing powder flow in the feed frame. This may result, a.o. in increased tablet weight variability, poorer content uniformity, capping and lamination. This research focuses on explaining the die filling performance depending on material properties and process settings, including throughput for small and large tablets. It was concluded that throughput had a negative impact on die filling variability, which is related to reduced residence time and lower fill fraction of the feed frame and dies. Furthermore, the die filling mechanism was inherently different for large tablets in comparison to small tablets. Higher die filling consistency was observed for dense, less porous, less compressible and better flowing powders. As a result of this work, a model was developed to predict the impact of formulation properties and process settings on die filling variability and its dependency on changes in throughput. This model will benefit formulation development at an early stage when active ingredient availability may be challenging as it will avoid the need to conduct experiments at high throughputs.