The relationship between austenite stabiliser element and post-weld heat treatment on the corrosion behaviour of the welded duplex stainless steel made by gas tungsten arc welding

The corrosion behaviour and the influence of nickel and post-weld heat treatment (PWHT) on the susceptibility to corrosion in welded duplex stainless steels were investigated. After PWHT, the amount of nickel for the weld region increases resulting in the generation of austenite and consequently, helping to obtain a favourable ferrite-to-austenite ratio. Comparing the experimental outcomes, it is noticed that the pits initiate and propagate in HAZ indicating this area is more susceptible to corrosion resistance compared to the fusion zone. The pitting resistance equivalent number alone is not sufficient reason to study the complex corrosion phenomenon, and the influence of other parameters namely microstructural evolution on the breakdown of passivity by pitting and the existence of intermetallic phases should be determined together.