激光阈值
材料科学
激光器
兴奋剂
光电子学
量子点
量子点激光器
二极管
半导体激光器理论
波长
光学
物理
作者
Zhonghui Yao,Xianye Wang,H M Chen,T. Wang,L Qin,junting liu,Z Y Zhang
出处
期刊:Nanotechnology
[IOP Publishing]
日期:2021-10-13
卷期号:33 (3): 035201-035201
被引量:3
标识
DOI:10.1088/1361-6528/ac2f5e
摘要
Abstract The modulation p-doping technique has emerged as an effective way to optimize the carrier dynamics process of quantum dot (QD) structures. Here, the laser structures based on the 1.3 μ m multiple-layer InAs/GaAs QD were fabricated with and without modulation p-doping. The carrier relaxation rate was increased after modulation p-doping, as demonstrated by transient absorption spectroscopy. The higher relaxation rate in p-doped QDs could be explained by more rapid carrier–carrier scattering process originating from increasing of the hole quasi-Fermi-level movement that increases the probability of occupancy of the valence states. In addition, the lasing behavior of Fabry–Perot lasers with and without modulation p-doping was investigated and compared. It was found that the ground state (GS) lasing in the absence of facet coating was successfully achieved in a p-doped laser diode with short cavity length (400 μ m), which can be attributed to the higher GS saturation gain caused by p-doping. With assistance of a designed TiO 2 /SiO 2 facet coating whose central wavelength (∼1480 nm) is far beyond the lasing wavelength of 1310 nm, the GS lasing could be realized in a laser diode with short cavity lengths (300 μ m) under continuous wave operation at room temperature, implying great potential for the development of low-cost and high-speed directly modulated lasers.
科研通智能强力驱动
Strongly Powered by AbleSci AI