材料科学
微观结构
涂层
腐蚀
冶金
合金
阳极氧化
无定形固体
复合材料
铝
有机化学
化学
作者
Yanqiu Yu,Yue Yu,Chen Bai-Meng,Shao Ya-Wei,YU Fu-Hui
出处
期刊:Acta Metallurgica Sinica
日期:2011-04-11
卷期号:47 (4): 455-461
被引量:3
标识
DOI:10.3724/sp.j.1037.2011.00010
摘要
Microarc oxidation(MAO),an important surface treatment technology for Al alloys in stead of hard anodization,was applied to prepare coating on Al alloy 7075,of which the microstructure and properties of the anti-corrosion and anti-wear were studied by XRD,SEM,neutral salt spray(NSS) test and ball-on-disc friction and wear test.The results show that the MAO coating formed on Al alloy 7075 mainly consists ofγ-Al_2O_3,α-Al_2O_3 and some amorphous SiO_2.Si element results from electrolyte or from substrate.MAO coating exhibits excellent corrosion resistance,for example,coatings with thickness of 70μm can endure more than 2000 h in NSS test even without seal treatment.Dense microstructure of MAO coating results in the excellent corrosion resistance.Post seal treatment can greatly enhance the corrosion resistance of the MAO coating,even for thin coating.MAO coating fabricated on Al alloy 7075 possesses similar friction coefficient but much higher wear resistance compared with hard anodized film,for example,the former is as 50 times as the wear resistance of the later.The MAO coating is just slightly worn and its frication coefficient remains unchanged throughout the test.
科研通智能强力驱动
Strongly Powered by AbleSci AI