All Inkjet-Printed Temperature Sensors Based on PEDOT:PSS

This paper develops a simple, cost-effective, fully Inkjet-printed flexible temperature sensor with easy fabrication steps using PiXDRO LP50 inkjet printer.The thermistor sensor employed a Poly(3,4ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT: PSS) as a temperature-sensitive layer with silver nanoparticles (AgNps) as a contact electrode.The sensor performance was evaluated on different dimensions and types of substrates.Epson Glossy paper with 255 µm thickness and Polyimide (Kapton HN) with 50 µm thickness were used over temperatures ranging from room temperature up to 50 ⁰C and 90 ⁰C for paper and Kapton substrates, respectively.The sensor developed over Glossy paper showed the best sensitivity of -1.67 %/⁰C in the chosen temperature range while the sensor showed +0.113%/⁰C on PI substrate.