The influence of the hole transport layers on the performance of blue and color tunable quantum dot light‐emitting diodes

Abstract The performance of the blue quantum dot light‐emitting diodes (QLEDs) is largely affected by the hole transport layers (HTLs). As a consequence of the deep valance band level of blue quantum dots (QDs), hole injection is relatively difficult in blue QLEDs. To favor the hole injection, HTLs with high hole mobility and deep‐lying highest occupied molecular orbital level are desired. In this work, various HTLs and their influence on the performance of blue QLEDs are demonstrated. Devices with poly(N‐vinylcarbazole) (PVK) HTL exhibit the highest external quantum efficiency while devices with poly[9,9‐dioctylfluorene‐co‐N‐(4‐(3‐methylpropyl))‐diphenylamine] (TFB) exhibit the lowest driving voltage. By combining the advantages of PVK and TFB, the blue QLEDs with TFB/PVK bilayered HTL simultaneously exhibit a low driving voltage of 2.6 V and a high external quantum efficiency of 5.9%. Moreover, the exciplex emission at the interface of HTL/QDs is also observed, and the emission intensity can be tuned by modulating the hole injection. By utilizing PVK doped with 25% poly(3‐hexylthiophene) (P3HT) as HTL, exciplex emission is significantly enhanced at low driving voltage while QD emission is dominant at high driving voltage. By combining the exciplex emission and the QD emission, the emission color can be effectively tuned from red to blue as the driving voltage changing from 2 to 10 V.