High Performance Anode-Free Lithium Pouch Cells Employing Lithiophilic Gel Polymer Electrolyte with Ion Conductive Network

Anode-free lithium metal batteries have recently emerged as a next generation battery due to increased energy density by adopting bare current collector as an anode without excess lithium source. However, lithium tends to grow in uncontrolled dendritic form when depositied on a heterogeneous current collector, which eventually leads to low coloumbic efficiency and poor life span of the battery. Recent studies have attempted to apply artificial solid electrolyte interphase (SEI) on the current collector to solve theses problems. PEO-based polymeric artificial SEI is commonly used due to high lithium ion conductivity and flexiblility, but its weak physical properties limit its practical application. Herein, we report a chemically cross-linked poly (ethylene glycol) diacrylate (PEGDA)-based gel polymer electrolyte containing AgNO 3 as Li nucleation seed for uniform Li deposition. It guides uniform Li-ion flux at the electrode/electrolyte interface and provides mechanical strength to suppress lithium dendrite growth. The gel polymer electrolyte was applied to anode free pouch cell and its cycling performance was investigated in the voltage range of 3.6 - 4.3 V at 0.5 C rate. Our results demonstrate that the proper combination of electrolyte and current collector can increase the conversion of polymerization and achieve stable interfacial properties with electrodes, resulting in improvement of the cycle life of anode free lithium pouch cell.