稀释
三元运算
分析化学(期刊)
基质(化学分析)
强度(物理)
标准加入
定量分析(化学)
化学
样品(材料)
材料科学
色谱法
热力学
检出限
物理
计算机科学
光学
程序设计语言
作者
Hui Li,Jizhou Ren,Jianbo Yang,Jie Xu,Rui Li,Xin Sunny Huang,Wanyi Sun
出处
期刊:Nukleonika
[De Gruyter Open]
日期:2024-11-20
卷期号:69 (4): 195-203
标识
DOI:10.2478/nuka-2024-0027
摘要
Abstract When using energy-dispersive X-ray fluorescence (EDXRF) to analyze Ni-Co-Mn (NCM) samples, if the standard sample's concentration greatly differs from the unknown sample's concentration, the traditional matrix dilution method requires repeated dilution and measurement. This makes the process time-consuming and labor-intensive. This study proposes an improved matrix dilution method to reduce sample preparation and analysis. This method first establishes a functional relationship model between the dilution factor and the characteristic X-ray intensity. Then the characteristic X-ray intensity of the analyzed element can be calculated by this model, avoiding unnecessary dilution and measurement steps. To verify the effectiveness of this method, the dilution factors and characteristic X-ray intensities of the test samples were fitted using the established functional relationship. The fitting results showed that the fitting coefficients of determination of the Mn, Co, and Ni were all 0.999. Quantitative analysis was performed on the characteristic X-ray intensity fitting values and measured values of the test samples. The results showed that the quantitative results of the two were consistent. The average error of the three elements for both methods was 1.1% and 0.7%, respectively. It shows that through the established functional relationship, the characteristic X-ray intensity can be effectively calculated by the dilution factor. This method can be applied to samples with identical elements and proportions of target elements, but with different concentrations, using the same set of standard samples.
科研通智能强力驱动
Strongly Powered by AbleSci AI