材料科学
聚碳酸酯
环氧乙烷
电解质
金属
氧化物
挤压
电化学
聚乙烯
固态
化学工程
乙烯
无机化学
聚合物
复合材料
电极
冶金
有机化学
工程物理
物理化学
化学
共聚物
催化作用
工程类
作者
Matteo Gastaldi,Francesco Gambino,Hamideh Darjazi,Alia Jouhara,Samuel Malburet,Marco Zanetti,Guido Saracco,Giuseppe Antonio Elia,Claudio Gerbaldi
标识
DOI:10.1016/j.mtener.2025.101947
摘要
All-solid-state lithium-ion batteries are one of the most promising candidates for next-generation energy storage systems. A challenge remains in identifying solid polymer electrolytes (SPE) with high ionic conductivity. We introduce an advanced, solid polymer electrolyte (SPE) composed of poly(ethylene oxide) (PEO) and poly(ethylene carbonate) (PEC), fabricated by solvent-free extrusion and UV crosslinking. This method yields flexible, self-standing electrolytes with remarkable thermal and mechanical stability, ensuring non-flammability and structural integrity, while also being scalable for industrial production. Li||Li cells demonstrate outstanding stripping/plating performance across a current density range of 0.025 to 0.2 mA cm -2 at 40 and 70 °C, with stable cycling for over 600 hours at 0.05 mA cm -2 and neglibile Li dendrite growth at 70 °C. Degradation is analysed via nuclear magnetic resonance (NMR) spectroscopy to evaluate the impact of UV crosslinking, while impedance spectroscopy investigates the electronic and ionic transport properties during oxidation and reduction processes. The lithium metal polymer cells assembled with a LiFePO 4 -based composite catholyte demonstrate near-full specific capacity at low rates (up to 157 mAh g −1 at C/5), and excellent rate capability at 70 °C, paving the way for the design of next-generation solid-state batteries with enhanced performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI