Amplified spontaneous emission from all-inorganic perovskite on a flexible substrate with silk fibroin

Abstract Stretchable microcavity lasers reveal potential application in flexible displays, biomedicine, and wearable devices in the near future. In this work, we investigated the characteristic of amplified spontaneous emission (ASE) from all inorganic CsPbBr 3 QDs on a flexible PET substrate with the assistance of biocompatible silk fibroin (SF) film. In comparison with the sample on PET directly, the ASE of all-inorganic perovskite film revealed a lower threshold of 32.7 μJ/cm 2 , higher slope efficiency, and a larger gain coefficient of around 100.0 cm −1 owing to the better stack and good arrangement of the CsPbBr 3 QDs on top of the SF film. For the temperature-dependent ASE measurement, the larger characteristic temperature of around 277 K is obtained from CsPbBr 3 QD/SF film, and the emission peak reveals a slight shift with temperature variation, which indicates its temperature-insensitive property. As the curvature of flexible substrate increases under the mechanical bending, the lasing threshold of CsPbBr 3 QD/SF film was reduced along with the increase in slope efficiency owing to the enhancement in the index guiding effect.