Fabrication and Properties of Porous Anorthite⁄Mullite Ceramics

Porous anorthite/mullite composite ceramics with different mullite content were fabricated by foam-gelcasting, using CaCO3, SiO2, α-Al2O3as raw material for anorthite phase and mullite powder for mullite phase. Effects of mullite powder content on bulk density, porosity, compressive strength and thermal conductivity of the porous composite ceramics were researched. It has been shown that mullite powder content has great effect on microstructure and properties of the porous anorthite⁄mullite composite ceramics. The open porosity of the prepared porous anorthite⁄mullite composite ceramics is in the range of 58.7 %~77.5 %, the compressive strength is between 4.2 and 30.9 MPa, and the thermal conductivity is in the range of 0.18 ~1.47 W⁄(m·K).