Effect of Solution Treatment and Aging Treatment on Mechanical Properties of 2060 Al-Li Alloy and Process Multi-Objective Optimization

Solution and aging heat treatment are effective means to improve the mechanical properties of Al-Li alloys. The solution treatment and aging treatment tests of 2060 Al-Li alloy were carried out. The yield strength, tensile strength, elongation, Vickers hardness, and microstructure of specimens after heat treatment were obtained by the tensile test at room temperature, Vickers hardness test, SEM analysis, TEM analysis, and EDS analysis. The effects of solution and aging heat treatment parameters on mechanical properties of 2060 Al-Li alloy were analyzed by response surface model and test results. The results show that sufficient solution can make the Cu-rich second phase of the alloy continuously dissolves into the aluminum matrix, and consequently obtain the supersaturated solid solution, the insoluble second phase is mainly θ’ (Al2Cu) phase, T(Al2Cu2Mg3) phase, and S’ (Al2CuMg) phase. The strength and hardness of the alloy are improved, but the ductility worsens with the degree of solution treatment enhances. With the increase of aging temperature and aging time, the strength and hardness of the alloy increase, but the elongation decreases. Taking tensile strength, elongation, and Vickers hardness of the alloy as the optimization objectives, the NSGA-II multi-objective optimization algorithm was used to optimize the process parameters of solution and aging heat treatment, and the heat treatment experiment was carried out. The optimization results show that the best mechanical properties of the alloy with matching strength and toughness can be obtained under the solution treatment at 466 °C/60 min and aging treatment at 185 °C/13 h.