A Multi-Threshold Segmentation for Tree-Level Parameter Extraction in a Deciduous Forest Using Small-Footprint Airborne LiDAR Data

The development of new approaches to tree-level parameter extraction for forest resource inventory and management is an important area of ongoing research, which puts forward high requirements for the capabilities of single-tree segmentation and detection methods. Conventional methods implement segmenting routine with same resolution threshold for overstory and understory, ignoring that their lidar point densities are different, which leads to over-segmentation of the understory trees. To improve the segmentation accuracy of understory trees, this paper presents a multi-threshold segmentation approach for tree-level parameter extraction using small-footprint airborne LiDAR (Light Detection And Ranging) data. First, the point clouds are pre-processed and encoded to canopy layers according to the lidar return number, and multi-threshold segmentation using DSM-based (Digital Surface Model) method is implemented for each layer; tree segments are then combined across layers by merging criteria. Finally, individual trees are delineated, and tree parameters are extracted. The novelty of this method lies in its application of multi-resolution threshold segmentation strategy according to the variation of LiDAR point density in different canopy layers. We applied this approach to 271 permanent sample plots of the University of Kentucky’s Robinson Forest, a deciduous canopy-closed forest with complex terrain and vegetation conditions. Experimental results show that a combination of multi-resolution threshold segmentation based on stratification and cross-layer tree segments merging method can provide a significant performance improvement in individual tree-level forest measurement. Compared with DSM-based method, the proposed multi-threshold segmentation approach strongly improved the average detection rate (from 52.3% to 73.4%) and average overall accuracy (from 65.2% to 76.9%) for understory trees. The overall accuracy increased from 75.1% to 82.6% for all trees, with an increase of the coefficient of determination R2 by 20 percentage points. The improvement of tree detection method brings the estimation of structural parameters for single trees up to an accuracy level: For tree height, R2 increased by 5.0 percentage points from 90% to 95%; and for tree location, the mean difference decreased by 23 cm from 105 cm to 82 cm.