Electrochemical processes for simultaneous sulfur and energy recoveries from sulfide-containing wastewater

Hydrogen sulfide and dissolved sulfide are notorious and lethal contaminants. The electrochemical process adopting the two-electron sulfide anodic oxidation reaction is an attractive strategy, which can simultaneously recycle and convert the chemical energy and sulfur resources into valued products. Sulfide pollutants are promising electron donors to reduce the electrochemical production cost, which is demonstrated in a sulfide/air fuel cell and a sulfide depolarized electrolyser. Sulfide oxidation behaviors are investigated on the developed IrxRu1-xO2 catalyst. A sulfide/air fuel cell is applied to evaluate the self-driven abilities of sulfur recovery and electricity generation. The sulfide/air fuel cell exhibits a notable discharge current density of > 120 mA cm−2 for 1.0 mol/L Na2S solution and 42.43 ± 1.94 mA cm−2 for the sulfide spent caustic stream. The potentials of sulfide anodic depolarization for electrochemical cost reduction are evaluated in a sulfide depolarized electrolyser for hydrogen production. Its open cell voltage is −0.33 V. For sulfur recovery, the cell can achieve about 20 mA cm−2 at 1.0 V, where the average energy cost of hydrogen production is about 2.39 kWh Nm−3. The sulfide removal rate is 0.26 ± 0.04 kgS m-2h−1, with an average current efficiency of 152.47 ± 28.59 %. This work may shed light on the potential of the incorporation of sulfide contaminants abatement and electrochemical productions