Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture

Abstract Friction welding is a joining technique for wood materials. The positive aspects of this technique are the speed of processing and the absence of chemical or mechanical agents, but the welded joints are not water resistant. To understand better the effect of moisture on the fracture behavior of welded joints, their fracture characteristics have been investigated. The double cantilever beam specimens were tested, which permit to compute the mode I energy release rate of a welded joint. The results confirm the negative effect of moisture on the fracture properties of the joint. The data concerning the maximal tensile strength of the joining material were collected by uniaxial tests and implemented in a finite element model to establish a cohesive law, which describes the behavior of welded pieces in terms of moisture content.