阴极
材料科学
电池(电)
降级(电信)
核工程
离子
充电周期
锂(药物)
电极
锂离子电池
淡出
可靠性(半导体)
汽车工程
工程物理
电气工程
计算机科学
涓流充电
化学
工程类
功率(物理)
物理
有机化学
物理化学
内分泌学
操作系统
医学
量子力学
作者
Molleigh B. Preefer,Tanvir R. Tanim,Samuel S. Welborn,David N. Agyeman-Budu,Alison R. Dunlop,Stephen E. Trask,Eric J. Dufek,Andrew N. Jansen,Johanna Nelson Weker
标识
DOI:10.1021/acs.jpcc.2c06977
摘要
Fast charging batteries are critical to the widespread adoption of electric vehicles to compete with refueling times of combustion-based vehicles. In the near term, adapting current commercial battery technologies to perform better under fast charging conditions through engineering optimizations will greatly expedite the process while exploratory fast-charging electrode materials are being pursued. To do so, the degradation modes in optimized Li-ion batteries need to be completely explored to understand fast charging limits while maintaining a high energy density and a long cycle life. While lithium plating on graphite still remains a challenge, cathode degradation also plays a key role in battery performance. We used nano- and micro-X-ray computed tomography to characterize the mechanical degradation of LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) in optimized Li-ion batteries cycled at three rates, 1C, 6C, and 9C, and at different stages of cycle life, 225 and 600 cycles. Despite using a conservative upper voltage cutoff limit aimed to minimize extensive cathode degradation, higher charging rates and increased cycling caused the polycrystalline NMC532 particles to fracture and pulverize, which likely drives cathode capacity fade and contributes to the decrease in overall cell performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI