Assessing light flex-fuel vehicle emissions with ethanol/gasoline blends along an urban corridor: A case of Fortaleza/Brazil

Brazil is the 9th largest producer of vehicles in the world, with 62.7% of the global fleet of Flex-Fuel Vehicles (FFVs). These vehicles used in Brazil operate with E27 (anhydrous ethanol used for gasohol blending) or E100 hydrous ethanol or any blend between these two. In recent years, Fortaleza city/Brazil has implemented Bus Rapid Transit (BRT) systems in two of the city’s most important avenues. Fortaleza BRT has two-way busways on the central verge of the roadway separated by two lanes from mixed traffic used by passenger cars, light commercial trucks, motorcycles, and heavy-duty vehicles. These systems have been regarded as a potential solution to improve some traffic factors, for only Buses, such as the average driving speed, thus benefiting both transportation and the environment. Thus, this research proposes a comprehensive impact evaluation of an FFV when traveling on BRT corridors, specifically on lanes from mixed traffic, and evaluate the emission factors, specifically on lanes from mixed traffic, composed of a wide variety of vehicle types. All tests in this study were performed at lanes from mixed traffic. Carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxides (NOx), and hydrocarbons (HCt) emissions were experimentally measured using a Portable Emission Measurement System (PEMS) under real-world traffic conditions in Fortaleza. FFV tailpipe emissions from E27, E85, and E100 fuels were highly sensitive to the power demand and traffic flow. Additionally, the VSP (Vehicle Specific Power) methodology was applied to characterize the driving modes. Overall, results showed the following: CO2 was, by far, the most highly emitted gas; the highest CO release occurred with E85 blend; NOx emission factors were similar for both E27 and E85, but much greater for E100; and HCt did not show a pattern, presenting both the highest and lowest emission levels with E100.