Pyrolysis temperature matters: Biochar-derived dissolved organic matter modulates aging behavior and biotoxicity of microplastics

Microplastics (MPs) have emerged as a novel and highly concerning contaminant that is ubiquitous in the aqueous environment. However, the aging of MPs induced by dissolved organic matter (DOM), especially biochar-derived dissolved organic matter (BDOM), and the biological toxicity after aging are not fully understood. In this study, the effects of biochar-derived BDOMs on the photoaging and biotoxicity of MPs were investigated at different pyrolysis temperatures using micro-scale polyethylene (PE) as an example. The results showed that the amount of ·OH generated by the BDOM/PE systems was related to the molecular composition and structure of BDOMs. High temperature BDOM7/9 with less lignin-like (34.33% / 41.80%) and more lipid (24.58% / 19.88%) content could produce more ·OH by itself, and its binding ability with PE was weaker due to its less hydrophobic components (SUVA260 = 0.10 / 0.11), which resulted in a weaker shading effect and less inhibition of the system, thus resulting in more ·OH production in the high temperature BDOM7/9/PE system. However, the involvement of BDOM, although favoring the long-term stable ·OH production of the system, did not significantly promote the photoaging of MPs. Furthermore, combined in vivo and in vitro biotoxicity studies of MPs showed that photoaging PE with the involvement of BDOM greatly improved systemic inflammation and tissue damage, as well as reactive oxygen species (ROS, such as ·OH and -OH)-induced cell death. For example, the addition of BDOM5/PE-light reduced the cell death of human lung, liver, and kidney cells from 54.70%, 69.39%, and 48.35% to 22.78%, 33.13%, and 25.83%, respectively, compared to the PE-light group. The results of this study contribute to an in-depth understanding of the environmental behavior of BDOM and MPs systems.