材料科学
渣滓
融合
表面粗糙度
激光器
激光功率缩放
表面光洁度
复合材料
光学显微镜
润湿
合金
表面处理
惯性约束聚变
曲面(拓扑)
光学
微观结构
穿透深度
偏移量(计算机科学)
冶金
薄膜
显微镜
锡
箔法
作者
Tianyu Zhang,Lang Yuan
出处
期刊:
日期:2025-09-10
卷期号:1 (3): 025340022-025340022
标识
DOI:10.36922/esam025340022
摘要
Thin-wall geometries produced by laser powder bed fusion combine high manufacturing efficiency, design flexibility, and cost-effectiveness for specialized applications. In such features, surface quality directly impacts dimensional accuracy and functional performance. This study investigates the effects of laser power, scan path, build orientation, and nominal gap distance on the top- and vertical-surface roughness, surface features, and dimensional error (DE) of 316L stainless steel thin walls. Optical microscopy was employed to characterize melt pool morphology and surface characteristics. Increasing laser power enlarges melt pools, promotes lateral migration, and induces dross formation on vertical surfaces, raising roughness and DE. Incorporating a contour scan with an inward offset reduces the scanned area, limits melt pool migration, and improves dimensional accuracy. Print orientation has a negligible influence on DE under the tested conditions, while small gaps may close entirely at high power due to large melt pools and migration. Compared to cubes fabricated with identical parameters, thin walls exhibit rougher top surfaces at high power, attributed to reduced track overlap, limited wetting from previous layers, and powder redistribution near vertical edges, whereas vertical-surface behavior remains similar. These findings provide practical guidelines for optimizing dimensional accuracy and surface quality in thin walls through coordinated control of process parameters and geometry.
科研通智能强力驱动
Strongly Powered by AbleSci AI