Design of overvoltage suppression filter based on high-frequency modeling of cable in SiC based motor drive

SiC-based motor drives have the advantages of achieving higher efficiency and higher power density than traditional Si-based motor drives, and are gradually being widely used in electric power transmission. Due to different application situations such as oil field and airplane, a long cable is applied between the motor drive and three-phase motor and the distance may exceed hundreds of meters, which will cause serious voltage reflection problem, damaging working life of the motor. Meanwhile, the high slew rate of output voltage created by SiC-based motor drive deteriorates this phenomenon. In order to solve this problem, we first analyze the principle and influencing factors of voltage reflection, and establish the equivalent circuit model of the long cable. Then we put forward design method of LRC passive filter to suppress voltage reflection, and give simulation analysis. At last we built an experimental platform to verify the effectiveness of the LRC passive filter in SiC-based motor drive, and the experimental results show that the LRC passive filter with optimized parameters has good suppression effect of voltage reflection.