分离器(采油)
材料科学
化学工程
聚丙烯
原位
储能
锂硫电池
吸附
硫黄
电极
纳米技术
化学
复合材料
有机化学
电化学
物理化学
冶金
工程类
物理
热力学
功率(物理)
量子力学
作者
Wen‐Jun Yi,Bo Niu,Huamin Hu,Chang Liu,Chao Qin,Jian Li,Chaoqun Niu,Lijun Li,Zi‐Sheng Chao,Guoqiang Zou
出处
期刊:Small
[Wiley]
日期:2024-12-17
卷期号:21 (5): e2407982-e2407982
被引量:12
标识
DOI:10.1002/smll.202407982
摘要
A functional separator is developed by in‐situ grafting nickel tetraaminophthalocyanine (NiTAPc) onto the surface of polypropylene (PP). It is applied to inhibit the shuttle effect of polysulfides (PSs) in lithium‐sulfur(Li‐S) batteries. The characterization results showed that NiTAPc is highly dispersed and uniformly grafted onto PP separator. In‐situ grafting strategy effectively mitigates the self‐agglomeration issue associated with NiTAPc and enhances the exposure of catalytically active Ni‐N4 sites. These sites exhibit excellent adsorption and conversion capabilities for PSs. This is consistent with the results of theory calculations, which indicate that the presence of NiTAPc can reduce the delithiation energy barrier associated with Li2S conversion. Owing to the excellent inhibition ability of NiTAPc on the shuttle effect of PSs, the Li‐S battery employing a PP‐NiTAPc separator demonstrates excellent cycle stability. It shows an initial specific capacity of 1256.5 mAh g−1 at 0.1 C, and a capacity retention of 582.4 mAh g−1 after 500 cycles at 1 C, showcasing a minimal decay rate of 0.0547% per cycle. The strategy adopted in this study offers valuable insights for the development of modified separators for rechargeable batteries and other energy storage fields.
科研通智能强力驱动
Strongly Powered by AbleSci AI