Validation of coupled ATHLET-OpenFOAM simulation on a large-scale single- and two-phase flow experiment

Abstract System thermal-hydraulics (STH) codes are successfully used in the last decades for design and analysis of the physical behavior of nuclear power plants (NPPs). These programs provide reliable results at comparatively low computational cost, but have limited capabilities to predict complex 3D flow phenomena, which is possible with Computational Fluid Dynamics (CFD) tools. In order to combine the advantages of STH and CFD codes, algorithms to couple these are developed. At GRS, a new OpenFOAM solver, based on the volume of fluid (VOF) method, was developed together with new coupling boundary conditions to couple the CFD program OpenFOAM with the system code ATHLET. In a next step, verification and validation activities were carried out. These included the analysis of a Pressurized Thermal Shock (PTS) scenario. For this purpose, data from the OECD/NEA ROSA V Test 1.1, carried out in the Japanese Large-Scale Test Facility (LSTF) was used. The experiment investigated the temperature stratification after emergency core cooling (ECC) injection under single- and two-phase natural circulation conditions in the primary cooling circuit of a pressurized water reactor (PWR). This paper discusses the results of the coupled simulations, compares the numerical results with experimental data, and identifies areas for future improvements.